There is a little more detail molded in than the Zero engine, but I won't put as much effort in, just a little.
I deepened the holes in the pistons for the spark plug wires. |
Did it a bit different this time. Glued the wires in place first. |
Cut them to size. |
I wanted to add a little more detail here. So I stretched some sprue, put it on a piece of tape to control the little bits and cut very thin slices. |
Everything is dry fit before priming. I didn't do the wires to the rear because seeing that detail is very limited. |
Before priming. |
Primed with Badger gray primer. |
Sprayed in Tamiya Gun Metal. It's really an awesome color. |
I sprayed the propeller in Tamiya Aluminum maybe? |
Dry brushed in steel. Picked out the details and painted the wires copper. |
Added an oil wash to the piece on the left. |
Did a little oil fading with white and blue and blended in with a dry brush. The effect is subtle. |
The completed engine. |
Test fit to the Corsair. |
And almost four months later, the propeller is done.
Before adding the Akan Pale Gold, I did a quick coat of AK Matte, then Ammo's Scratching Effects. |
Masked the Pale Gold and sprayed with Model Master's Aircraft Interior Black. |
Blades masked off and I sprayed Akan's Sea Blue. A bit hard to see the difference here, but there certainly is in the real lifes. |
Finished painting. Let's see if that scratches effect works. |
An accidental scratch on the hub, but it looks good. |
All done and I'm pleased with the result. |
That's all for now. The Corsair is nearing completion so hopefully I'll get some more progress posted shortly.
Thanks for looking in.